Motorcycle helmet manufacturer Said to regularly maintain motorcycle helmets

1. Internal cleanliness of motorcycle helmet: after long-term use, dirt will accumulate inside the helmet, causing odor. In this case, it should be cleaned. The facial cleanser used is neutral, and the shampoo is better. Dosage should be controlled to avoid leaving cleaner odor. Be careful not to exert too much force during scrubbing, or the buffer material will deform. After cleaning, wipe off the water with a towel and put it in a ventilated place to dry.

2. Motorcycle helmet surface maintenance: Compared with the inside of the helmet, the helmet surface is easier to get dirty, so the surface should be cleaned frequently. When there is a stain on the helmet, first wipe the stain with a wet cloth, and then wipe it with car wax or light wax to make the motorcycle helmet clean and bright, or use a helmet specific whitening agent for better results.

3. Maintenance of motorcycle helmet goggles: Since goggles are transparent equipment, be careful when wiping them. To clean the goggles, add neutral detergent into the water, rub it with hands, then rinse it thoroughly with flowing water, and then dry the water with soft cotton cloth or paper towel. Wipe the outer surface with water wax or antistatic agent to reduce dust adhesion and speed up rainwater flow. The inside of goggles should be coated with anti fog agent, which plays an important role in reducing fog adhesion at night.