Electric vehicle helmet What is the cleaning and maintenance method of?

The surface of electric vehicle helmets is often contaminated with dust and oil, so it is a routine job to wipe the surface. If the helmet has stains, first wipe the stains with a damp cloth, and then wipe them with water wax or car polish wax to make the helmet clean and bright. You can also use special brightener for helmets, with better effect.

1. Internal maintenance of electric vehicle helmet

After using the electric helmet for a period of time, due to sweat on the head, the air permeability is not very good, and there will be oil stains and odor. In this case, it should be cleaned. The detergent used is preferably neutral. In order to prevent the detergent from leaving an unpleasant smell, the use should be limited. Do not use excessive force to scrub the inside of the helmet. Otherwise, the buffer material inside will be deformed or damaged. After cleaning, wipe off the moisture with a towel or paper towel and place it in a ventilated place for natural air drying.

2. Maintenance of helmet goggles for electric vehicles

When cleaning goggles, be careful because goggles are transparent. Add neutral detergent into the water, wipe the inside and outside with soft cotton cloth, rinse with clean water, and dry naturally. Wipe water wax or antistatic agent on the external surface to reduce the adhesion of dust and oil stain. When the weather turns cold and driving at night, apply anti fog agent on the inside of goggles to reduce mirror fog.