Motorcycle helmet manufacturer What should be paid attention to when selecting helmets

1. The inner side of the helmet must be equipped with an impact resistant lining. The surface lining material matching the head is a thin mesh lining, which should have the function of absorbing sweat and head grease. In addition, there should be a ventilation slot with a depth of more than 10MM on the pad to allow air to circulate in the helmet.

2. The chin strap of the motorcycle helmet should be soft, and the buckle and other strong objects should not exceed 5MM outside the body.

3. Motorcycle helmets shall be light and comfortable when wearing helmets, and the weight of helmets shall not exceed 2KG.

4. The helmet shall not be blocked or stuffy, and the vision shall be clear and open without being blocked. The vision shall not be less than 105 degrees when stopped.

5. When wearing a helmet, you can clearly hear and distinguish sounds from all directions, and there should be no noise such as turbulence during the journey.

6. The helmet shall be equipped with good ventilation and heat insulation devices inside, and shall be able to prevent dust, insects and water.

7. Helmets should have excellent reflective performance and thermal radiation resistance, and have striking colors.

8. The lens of helmet goggles is clear and colorless, with good resistance and is not easy to break, so as to ensure the driver's vision is not affected.

9. Helmet material Z shall be laminated with glass fiber.