How to use correctly Electric vehicle helmet

1. Wear a helmet without straps. In case of an accident, the helmet will be thrown out without protection.

2. The use of worn protective lenses affects the driver's vision and hinders safe driving.

3. Wearing a helmet that is too narrow or too small can easily crush the nerves in the head and cause damage to the body.

4. When using expired helmets, the general service life of helmets is one year. After a long time of use, the helmet's material changes greatly. After aging, the materials of helmets are easy to become brittle and cannot achieve the protective effect of helmets.

5. The price is cheap. Wear inferior helmets with poor product quality and no production license.

Correct maintenance of electric vehicle helmet

1. Clean the inside of the helmet. The helmet has been used for a long time, and dirt and odor often accumulate inside the helmet. In this case, it should be cleaned. Z Good use of neutral detergent, even better use of shampoo. In order to prevent the detergent from leaving an unpleasant smell, the use should be limited. Do not use excessive force to scrub the inside of the helmet. Otherwise, the cushioning material will deform and lose its cushioning function. After cleaning, wipe off the moisture with a towel or paper towel and place it in a ventilated place for natural drying. Do not use a hair dryer. The removable lining of the permanent helmet solves the problem of cleaning the interior of the helmet.

2. Maintenance of helmet surface. Compared with the interior of the helmet, the surface of the helmet is easier to stain, so the surface is often wiped. If there is any stain on the helmet, first wipe the stain with a damp cloth, and then wipe the car with water wax or polishing wax to make the helmet clean and bright. You can also use special brightener for helmets, with better effect.

3. Maintenance of helmet goggles. Since goggles are transparent devices, be careful when wiping. When cleaning goggles, add neutral detergent in water, scrub by hand, then rinse thoroughly with tap water, and then wipe water with soft cotton cloth or paper towel. After Z, wipe the outer surface with water wax or antistatic agent to reduce the adhesion of dust and speed up the flow of rainwater. Antifogging agent shall be applied on the inside of goggles, which plays an important role in reducing fog adhesion at night. Of course, when wearing goggles to drive, you should also pay attention to breathing method to reduce mirror fog.