Many riders may not have really cleaned their helmets, but only cleaned the dirt on the surface. If the helmet lining is worn for a long time, it will inhale the driver's sweat, which will lead to odor emission and bacteria breeding, which is very harmful to the driver's health. Today, we will clean the helmet. We will give you a small demonstration, so that you can clearly understand how to clean the helmet.

1. Pay attention to the strength when removing the lining, and do not use brute force to prevent the lining from being damaged.

2. Be sure to soak with clean water added with detergent for 20 minutes or more.

3. Do not dry the lining by washing machine. The lining is usually connected with plastic parts, which will cause damage to the plastic parts.

4. When wiping the lens, it must be soaked in clean water, and then try to touch the dirt with your hands. After the dirt is softened, gently wipe it with your palm and water flow, and finally rinse it with clean water and then dry it with a soft cloth.

5. Install the lens back in reverse according to the removal sequence before, and install the lens at the end.

6. The exterior of the helmet can be wiped clean with a damp cloth for many times.

7. Spray wax can be used for maintenance of helmet paint.

8. Helmets that have not been installed can also be sterilized and aired by ultraviolet rays in the sun according to personal requirements.