It is important to buy motorcycle helmets. Choose Motorcycle helmet manufacturer The materials of are as follows:

1. The density of foam cushioning materials for helmets is very low, even inferior to that for installing household appliances.

2. Some materials in the interior feel uncomfortable, please choose carefully.

3. Be careful that the small black heart factory uses recycled materials to make helmets. The helmet will break if you drop it gently. The sun will give off a bad smell and become soft. There may be some garbage and toxic and harmful substances when recycling. Because this helmet is super cheap, many people buy it. For safety, don't be greedy for cheap.

Choose a helmet

1. The inner side of the helmet must be equipped with an anti-collision pad. The surface pad material matching the head is thin mesh lining, which should have the function of absorbing sweat and head grease. In addition, there should be a ventilation slot with a depth of more than 10 mm on the liner to allow air circulation in the helmet.

2. The chin strap of the motorcycle helmet shall be soft, and the hard protrusions such as buckles shall not be more than 5mm from the outer surface.

3. Motorcycle helmets should be light and comfortable when wearing helmets. The weight of helmet shall not exceed 2KG.

4. The helmet shall not be blocked or suffocated, and the vision shall be wide and clear without obstacles. The viewing angle shall not be less than 105 degrees under static state.

5. When wearing the helmet, you can clearly hear and distinguish the sound from all directions, and there should be no vibration and other noises during driving.